Ricoh DF60_SM A376 free download

File name DF60_SM.PDF

DUAL JOB FEEDER (Machine Code: A376) 23 April 1993 SPECIFICATIONS 1. SPECIFICATIONS Original Feed Mode: Automatic document feed mode Automatic reverse document feed mode Semi-automatic document feed mode Mixed sized mode Pasted original mode Preset mode Combine originals mode Original Size, Weight and Table Capacity: Paper Weight Maximum number of originals to be set A3 lengthwise A4 lengthwise A4/A3 version A4 sideways A5 sideways B4 lengthwise B5 lengthwise B5sideways F (8" x 13") lengthwise 11" x 17" lengthwise 81/2 x 14" lengthwise 81/2 x 11" lengthwise 81/2 x 11" sideways LT/DLT version 51/2" x 81/2" lengthwise 51/2" x 81/2" sideways 8" x 13" (F) lengthwise 81/2 x 13" (F4) lengthwise 8" x 101/2" lengthwise 8" x 10" lengthwise 8" x 10" sideways 10" x 14" lengthwise 11" x 15" lengthwise q: 40.7 g/m2 11 lb 50 p p p p p p p p p p p p p p p p p p p p p 46.5 12.5 50 p p p p p p p p p p p p p p p p p p p p p 52.8 14 50 q q q r q q q q q q q q r p q q q q q q q 64.0 17 50 q q q r q q q q q q q q r p q q q q q q q 81.4 22 50 q q q r q q q q q q q q r p q q q q q q q 104.7 28 30 r r r r r r r r r r r r r p r r r r r r r 128.0 34 25 p p p p p p p p p p p p p p p p p p p r: p: Mixed Original mode Preset mode ADF mode (1 sided originals mode) ARDF mode (2 sided original(s) mode) SADF mode ADF mode, ARDF mode, SADF mode ADF mode, SADF mode 1 Dual Job Feeder p p SPECIFICATIONS 23 April 1993 Original Standard Position: Rear left Original Separation: Original Transport: Power Source: Power Consumption: Dimensions (W x D x H): Weight: Feed and friction belt One flat belt DC24V from the copier, 2.0A (average) 70W 680 x 508 x 116mm (26.8" x 20.0" x 4.6") 13kg (28.7lb) 2 23 April 1993 COMPONENT LAYOUT 2. COMPONENT LAYOUT 2.1 MECHANICAL COMPONENT LAYOUT 1 2 3 4 5 6 7 12 11 10 9 8 1. Friction Belt 2. Original Stopper 3. Press Roller 4. Side Fence 5. Original Table 6. Exit Roller 7. Inverter Pawl 8. Inverter Roller 9. Transport Belt 10. Pick-up Rollers 11. Pull-out Roller 12. Feed Roller 3 Dual Job Feeder ELECTRICAL COMPONENT DESCRIPTION 23 April 1993 3. ELECTRICAL COMPONENT DESCRIPTION Refer to the electrical component layout on the reverse side of the attached Point to Point for symbols and index numbers. Symbol Motors M1 Feed-in Drives the feed-in system (pick-up, feed, pull-out rollers, separation belts) Drives the transport belt. Drives the feed-out and the inverter system. Informs the CPU when the DJF is being closed so that original size detection sensors can check the original size. Checks for original misfeeds and sets original stop timing when in auto-reverse mode. Detects the leading edge of the original to turn off the feed-in clutch and to change the feed-in, belt drive motors speed. Also detects the original length. Detects the original width. Detects the original width. Detects the original width. Detects the trailing edge of the original to change the belt-drive motor speed. Also, detects the original length and or